14 3/4"inches (374.6mm) IADC537 TCI tricone drill bit roller cone bit oilfield drilling bit

TCI tricone bits serve as critical equipment for oil drilling operations. During drilling, the cutting teeth engage the well bottom in an alternating manner, leading to minimal rock-breaking torque. High specific pressure is generated due to the small contact area, facilitating effective formation penetration. The extended total working edge results in relatively low wear. Such tricone bits are applicable to diverse formations ranging from soft to extremely hard.

keyword:

tricone roller bit tricone drill bit roller cone bit roller bit tci bit

Category:

Details

Introduction

Product specifications
Diameter	14 3/4"(374.6mm)
Bearing type	Rubber Sealed Bearings
Tooth Type	(Tungsten Carbide inserts)
Circular Type	mud
Thread Connection	7 5/8 API REG
Wheel diameter protection (diameter retention)	Available
Shirttail Protection	Available
Operating parameters
RPM	120-50
WOB	0.45-1.0
Application Formation	Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc.

Introduction

TCI Tricone Bit is suitable for soft to hard formation such as clay,mudstone,limestone,sandstone,hard shale,dolomite, etc. Tricone bit with high strength toughness of carbide tooth reduces rate of gear broken and with high-performance wear resistant materials improve the wear resistance and service life of the bit.

Features

1.Bearing Structure: High precision journal bearing with two thrust faces. Ball locked cone. Hardfaced head bearing surface. Cone bearing inlaid with friction reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved, and suitable for high rotary speed.

2.Cutter: premium carbide teeth having increased resistance to breaking and abrasion, maximum increase cutting structure operating life.

3.Gauge protection: more tungsten carbide inserts are placed in the gauge to reduce the wear in the abrasive formation. It can protect gauge and increases the stability and life of the bit.

4.Nozzle：These nozzles are much sturdier and provide greater flow capacity and maximize fluid distribution to the cones.

Technology

1.Seal and Lubrication: The bearing seal is adapting the high quality HNBR O-ring. The best seal compression and the radial seal structure can enhance the seal performance. The compensation system and the high quality bit grease can limit pressure differential, and greatly increase the lubricating reliability.

2.Six-point Gauge Stability: The design delivers near six-point contact with the borehole wall for unequalled bit stability that protects the cutting structure from damaging lateral blows
3.Motor hardfacing: Tungsten carbide particle hardfacing is applied liberally along the shirttail and extended up the leading edge of the bit leg for additional protection in high-speed, directional or abrasive applications

Application

Soft to hard formations with several hard inter-bed,such as clay/chalk/ compressive mudstone/hard gysum/salt/shale/limestone/dolomite.etc

Popular models

Operating Parameters